No results were found for the filter!
is44/is52-lagerset a02

is44/is52-bearingset a02

is44/is52 bearing set including centering ring. The two bearings in the dimensions 44x35x5,5-36°/45° und 52x40x7-45°/45° are used, among others, by the bicycle manufacturer Scott
€62.00
acros flatpedal bushing/bearing/seal-kit

acros flatpedal bushing/bearing/seal-kit

It always happens at some point! Here you can breathe new life into your flatpedal if necessary. Contains all seals as well as plain bearings and ball bearings required for the maintenance of a pedal set (left + right).
€12.00
staubschutzkappe

dust cover

The dust cover provides additional protection for the bearing and prevents creaking noises as a separating layer between the axle and bearing. This is due to the self-lubricating and viscoplastic properties of the protective cap made of...
€0.95
gabelkonus SAC4660 auf 1,8", drag seal, schwarz

crown race 1.8" für zs66 & is60

Crown race with vulcanized-on seal for forks with 1.8" steerer tube. Suitable for zs66 headset and is60 headset.
€13.00
gabelkonus SAC4660  auf 1 1/8"

crown race 1.1/8" für zs66 & is60

Crown race for forks with 1.1/8" steerer tube. Allows the change from the original fork with 1.8" steerer to a fork with 1.1/8" steerer. Suitable for zs66 and is60 acros headsets.
€13.00
gabelkonus 1.5", schwarz, dichtung, hoch

crown race 1.5" für ec44, ec49, zs55, zs56 & is52

Crown race with integrated sealing for optimal protection of the headset bearing against moisture and dirt. Compatible with acros headsets ec49, zS55, zS56 and is52 in combination with 1.5" steerer tube (40mm) at the bottom.
€13.00
gabelkonus 1 1/8" für zs44, is41 & is42

crown race 1 1/8" for zs44, is41 & is42

Crown race with a stack hight of 2.1mm and integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with the acros headsets zs44, is41 and is42 in combination with a 1 1/8" steerer tube...
€13.00
gabelkonus 1 1/8" für ec34

crown race 1 1/8" for ec34

Aluminium crown race for forks with 1 1/8" steerer tube (28,6mm) at the top. Suitable for our ec34-headset-lower-part.
€11.00
set plugs für icr steursatzdeckel

set plugs for headset cover icr

Set of plugs for icr headset cover, consisting of a left and right plug. The two rubber plugs have three prepared cable bushings which can be used as required. In total, up to 6 cables can be routed watertight into the frame. Compatible...
€3.00
is52-steuersatzdeckel für merida aluminium-rahmen

is52 headtube cover for merida aluminium frames

is52 headtube cover for merida aluminium frames Wireport EXT
€16.00
is52-steuersatzdeckel für merida carbon-rahmen

is52 headtube cover merida carbon frame

is52 headtube cover merida carbon frames Wireport INT
€16.00
6 7 8 9 From 20
6 7 8 9 From 20
Viewed