No results were found for the filter!
is52 headtube cover sh01, od56, asym, om, icr
headtube cover sh01 for acros is52-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 56mm and a height of 5mm. Asymmetrical design and therefore only suitable for "standard"...
€11.00
is52 headset lower part, 1,5", 36°/45° for...
Fully integrated headset (is) for frames with 52mm bearing seat and the connecting angles 36°/45° at the bottom. This type of bearing is currently only used in Cannondale Lefty forks. In our is52 headset lower part, the combination of...
€42.00
plug headtube cover sh02, is52, zs56 and zs66
plug suitable for is52 headset cover sh02 24.52.217-OD56-AM zs56 headset cover sh02 32.52.212-OD62-AM is60 headset cover sh02 24.52.215-OD68-AM
€3.00
plug headtube cover sh01, is52 and zs556
plug for is52 headset cover sh01: 24.52.216-OD56-AM and zs56 headset cover sh01: 32.52.106R1-AM
€3.00
compressionring icr aluminium + IPS for...
Compression ring made from aluminium for integrated cable routing (icr) including a internal protection sealing (ips) for additional protection of the headset bearings against moisture and dirt. Compatible with the semi-integrated acros...
€19.00
compression ring alu 1 1/8" for ac3041
compression ring made from aluminium. Compatible with acros headset ec-34, zs44, zS49, zS56, is41 and is42 in combination with 1 1/8" steerer tubes (28.6mm) at the top.
€14.00
spacer set sh02, 2x10mm
spacer set sh02 consisting of 2x10mm. The spacers are suitable for is52 headset cover sh02 24.52.217-OD56-AM zs56 headset cover sh02 32.52.212-OD62-AM is60 headset cover sh02 24.52.215-OD68-AM
€14.00
zs56 headtube cover sh02, od62, asym, om, icr
headtube cover sh02 for acros zs56-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 62mm. Asymmetrical design and therefore suitable for "special" stems with article:...
€11.00
is60 headtube cover sh02, od68, asym, om, icr
headtube cover sh02 for acros is60-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 68mm. Asymmetrical design and therefore suitable for "special" stems with article:...
€11.00
is52 headtube cover sh02, od56, asym, om, icr
headtube cover sh02 for acros is52-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 56mm. Asymmetrical design and therefore suitable for "special" stems with article:...
€11.00
tpf bottom bracket.
Screw it in, and go: the acros tpf bottom bracket is the logical evolution of press-fit bottom brackets. Thanks to the threaded bearing cups, you can say good-bye to that annoying creaking synonymous with press-fit bearings, and all you...
€50.00