No results were found for the filter!
compression ring alu 1 1/8" for ac3041
compression ring made from aluminium. Compatible with acros headset ec-34, zs44, zS49, zS56, is41 and is42 in combination with 1 1/8" steerer tubes (28.6mm) at the top.
€14.00
spacer set sh02, 2x10mm
spacer set sh02 consisting of 2x10mm. The spacers are suitable for is52 headset cover sh02 24.52.217-OD56-AM zs56 headset cover sh02 32.52.212-OD62-AM is60 headset cover sh02 24.52.215-OD68-AM
€14.00
zs56 headtube cover sh02, od62, asym, om, icr
headtube cover sh02 for acros zs56-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 62mm. Asymmetrical design and therefore suitable for "special" stems with article:...
€11.00
is60 headtube cover sh02, od68, asym, om, icr
headtube cover sh02 for acros is60-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 68mm. Asymmetrical design and therefore suitable for "special" stems with article:...
€11.00
is52 headtube cover sh02, od56, asym, om, icr
headtube cover sh02 for acros is52-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 56mm. Asymmetrical design and therefore suitable for "special" stems with article:...
€11.00
acros t47 bottom bracket
Our t47 bottom bracket is primarily aimed at all road bike owners that are looking for a suitable bottom bracket for a SRAM DUB, Shimano Hollowtech II, or 30 mm crank. In combination with replaceable, stainless-steel deep groove ball...
€80.00
tpf bottom bracket.
Screw it in, and go: the acros tpf bottom bracket is the logical evolution of press-fit bottom brackets. Thanks to the threaded bearing cups, you can say good-bye to that annoying creaking synonymous with press-fit bearings, and all you...
€50.00
acros bsa bottom bracket
From SRAM DUB to Shimano HollowTech II and 30 mm spindles, our bsa bottom bracket accommodates all common spindle standards. In combination with interchangeable, stainless-steel deep groove ball bearings and high-quality seals, our...
€80.00
acros bottom bracket bearing tool
With our bottom bracket bearing tool made of fiberglass-reinforced polymer, you can replace your ball bearings from our bottom brackets in no time. One side is for knocking out, while the other is for installing the bearings back again.
€11.00
acros bottom bracket tool
We love multipurpose tools as much as anyone else! For this reason, we developed our bottom bracket tool to enable you to work on all common bottom bracket standards with a single tool. It’s as simple as it’s clever.
€26.00
tpf bb bearing set
Replacement bearing set consisting of two deep groove ball bearings 25x37x7 incl. the sealed shims suitable for our tpf bottom bracket and 24mm Hollowtech II Shimano cranks or Sram GXP cranks.
€35.00
bsa bb bearing set
Replacement bearing set consisting of two deep groove ball bearings 30x42x7 incl. the sealed shims suitable for our bsa bottom bracket.
€45.00