No results were found for the filter!
NEW
is52-steuersatz-unterteil, 1,5", 36°/45° for Cannondale Lefty

is52 headset lower part, 1,5", 36°/45° for...

Fully integrated headset (is) for frames with 52mm bearing seat and the connecting angles 36°/45° at the bottom. This type of bearing is currently only used in Cannondale Lefty forks. In our is52 headset lower part, the combination of...
€42.00
NEW
plug steuersatzdeckel sh02, is52, zs56 und zs66

plug headtube cover sh02, is52, zs56 and zs66

plug headtube cover sh02, is52, zs56 and zs66
€3.00
NEW
plug steuersatzdeckel sh01, is52 und zs56

plug headtube cover sh01, is52 and zs556

plug headtube cover sh01, is52 and zs556
€3.00
NEW
zentrierring icr aluminium + IPS für integrierte kabelführung

compressionring icr aluminium + IPS for...

Compression ring made from aluminium for integrated cable routing (icr) including a internal protection sealing (ips) for additional protection of the headset bearings against moisture and dirt. Compatible with the semi-integrated acros...
€19.00
NEW
zentrierring aluminium 1 1/8" für ac3041

compression ring alu 1 1/8" for ac3041

compression ring made from aluminium. Compatible with acros headset ec-34, zs44, zS49, zS56, is41 and is42 in combination with 1 1/8" steerer tubes (28.6mm) at the top.
€14.00
NEW
spacer set sh02, 2x10mm

spacer set sh02, 2x10mm

spacer set sh01 consists of 2x10mm and 2x5mm spacer. The spacers are compatible with our is52 headtube cover sh01 (24.52.217-OD56-AM), zs56 headtube cover sh01(32.52.212-OD62-AM) and zs66 headtube cover sh02 (24.52.215-OD68-AM).
€14.00
NEW
zs56-steuersatzdeckel sh02, od62, asym, om, icr

zs56 headtube cover sh02, od62, asym, om, icr

zs56 headtube cover sh02, od62, asym, om, icr
€11.00
NEW
is60-steuersatzdeckel sh02, od68, asym, om, icr

is60 headtube cover sh02, od68, asym, om, icr

is60 headtube cover sh02, od68, asym, om, icr
€11.00
NEW
is52-steuersatzdeckel sh02, od56, asym, om, icr

is52 headtube cover sh02, od56, asym, om, icr

is52 headtube cover sh02, od56, asym, om, icr
€11.00
tpf – threaded pressfit innenlager, edelstahl, ht2

tpf bottom bracket.

Screw it in, and go: the acros tpf bottom bracket is the logical evolution of press-fit bottom brackets. Thanks to the threaded bearing cups, you can say good-bye to that annoying creaking synonymous with press-fit bearings, and all you...
€50.00
t47 innenliegend slim, dub, edelstahl

acros t47 bottom bracket

Our t47 bottom bracket is primarily aimed at all road bike owners that are looking for a suitable bottom bracket for a SRAM DUB, Shimano Hollowtech II, or 30 mm crank. In combination with replaceable, stainless-steel deep groove ball...
€80.00
bsa innenlager, dub, edelstahl

acros bsa bottom bracket

From SRAM DUB to Shimano HollowTech II and 30 mm spindles, our bsa bottom bracket accommodates all common spindle standards. In combination with interchangeable, stainless-steel deep groove ball bearings and high-quality seals, our...
€80.00
1 2 3 4 From 10
1 2 3 4 From 10
Viewed