No results were found for the filter!
is44 headset cover (ai-70) 4,5mm
Our low stack is44-headset-cover fits all canyon models with ai-70 canyon/i-lock headset . With this cover you can convert your ai-70-headsets to a classic headset cover and achieve a lower cockpit height. For the conversion you will...
€13.00
is44/is52-bearingset a02
is44/is52 bearing set including centering ring. The two bearings in the dimensions 44x35x5,5-36°/45° und 52x40x7-45°/45° are used, among others, by the bicycle manufacturer Scott
€62.00
dust cover
The dust cover provides additional protection for the bearing and prevents creaking noises as a separating layer between the axle and bearing. This is due to the self-lubricating and viscoplastic properties of the protective cap made of...
€0.95
crown race 1.8" für zs66 & is60
Crown race with vulcanized-on seal for forks with 1.8" steerer tube. Suitable for zs66 headset and is60 headset.
€13.00
crown race 1.1/8" für zs66 & is60
Crown race for forks with 1.1/8" steerer tube. Allows the change from the original fork with 1.8" steerer to a fork with 1.1/8" steerer. Suitable for zs66 and is60 acros headsets.
€13.00
crown race 1.5" für ec44, ec49, zs55, zs56 & is52
Crown race with integrated sealing for optimal protection of the headset bearing against moisture and dirt. Compatible with acros headsets ec49, zS55, zS56 and is52 in combination with 1.5" steerer tube (40mm) at the bottom.
€13.00
crown race 1 1/8" for zs44, is41 & is42
Crown race with a stack hight of 2.1mm and integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with the acros headsets zs44, is41 and is42 in combination with a 1 1/8" steerer tube...
€13.00
crown race 1 1/8" for ec34
Aluminium crown race for forks with 1 1/8" steerer tube (28,6mm) at the top. Suitable for our ec34-headset-lower-part.
€11.00
set plugs for headset cover icr
Set of plugs for icr headset cover, consisting of a left and right plug. The two rubber plugs have three prepared cable bushings which can be used as required. In total, up to 6 cables can be routed watertight into the frame. Compatible...
€3.00
is52 headtube cover for merida aluminium frames
is52 headtube cover for merida aluminium frames Wireport EXT
€16.00