No results were found for the filter!
is44/is48-bearingset (ai-70) for canyon
Headset bearing set for Canyon frames with 44mm bearing seat at the top and 48mm at the bottom of the head tube. The is44/is48 bearing set consists of one steel angular contact ball bearing with the dimensions 35x44x5mm and 37x48x7mm...
€62.00
is44/is44-bearingset for canyon
is44/is44 bearing set including centering ring. The two bearings in the dimensions 44x35x5,5 and 44x33x6 are used in the models Endurace CF SLX / CF SL / CF, Grail, Inflite CF SLX & Ultimate CF EVO / SLX / SL, among others.
€62.00
is42/is52-bearingset
Replacement heatset bearings for fully integrated headsets (is). The is42/is52 bearing set consists of two stainless steel angular contact ball bearings for frames with 42mm bearing seat at the top and 52mm at the bottom of the head...
€62.00
is42/is47-bearingset
Hedset bearings for Focus frames with 42mm bearing seat at the top and 46,8mm at the bottom of the head tube. The is42/is47 bearing set consists of two stainless steel angular contact ball bearings and a matching compression ring.
€62.00
is41/is52-bearingset
Replacement headset bearings for frames with fully integrated headset (is) with bearing seats of 41mm at the top and 52mm at the bottom of the head tube. The is41/is52 bearing set consists of two stainless steel angular contact ball...
€62.00
ai70-steuersatzdeckel jür canyon
headset cover "the clamp" for all canyon models with ai-70 canyon/i-lock steuersatz and bearing dimensions 35x44x5 and 37x48x7. These are used for the models Inflite AL, Ultimate AL, Endurace, Urban AL, Commuter and Roadlite. You can...
€21.00
is41/is47-bearingset
Replacement headset bearings for frames with fully integrated headset (is) with bearing seats of 41mm at the top and 47mm at the bottom of the head tube. The is41/is47 bearing set consists of two stainless steel angular contact ball...
€62.00
is52 headset cover - integrated cable routing
Headset cover for acros is52-headset-upper-parts with integrated cable routing (icr). The icr-headset-cover has an outer diameter (od) of 56mm and a height of 9,5mm. The two rubber plugs included each have three prepared cable grommets...
€16.00
is52-upper part for integrated cable routing (ICR)
IS52-upper part for integrated cable routing (ICR)
€42.00
compressionring + IPS for integrated cabel routing
Compression ring for integrated cable routing (icr) including a internal protection sealing (ips) for additional protection of the headset bearings against moisture and dirt. Compatible with the semi-integrated acros...
€11.00
is52 headset lower part
Fully integrated headset (is) for frames with 52mm bearing seat at the bottom. In our is52-headset-lower-part, the combination of stainless steel angular contact ball bearings and well thought-out seals ensures durability with minimum...
€42.00
is52/is52 bearing kit - integrated cable routing
Replacement headset bearings for frames with 52mm bearing seat of the head tube at the top and bottom and integrated cable guide (icr). Our is52/is52 bearing set consists of two angular contact ball bearings and a special centering ring...
€62.00