No results were found for the filter!
zs55 headset lower part
Semi-integrated headset (zs) for frames with 55mm head tube at the bottom. In our zs55-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure longevity with minimum...
€44.00
is44/is52-bearingset a01
IS44/IS52 Headset Bearing Kit – For Frames with 44 mm / 52 mm Bearing Seats and 1.5"–1¼" Tapered Forks. The IS44/IS52 bearing kit is designed for modern frames with a tapered head tube and forks with a 1.5" to 1¼" tapered steerer. It...
€62.00
set plugs for headset cover icr
Set of plugs for icr headset cover, consisting of a left and right plug. The two rubber plugs have three prepared cable bushings which can be used as required. In total, up to 6 cables can be routed watertight into the frame. Compatible...
€3.00
zs44 headset cover
Aluminium headset cover for our semi-integrated zs44-headset-upper-part. Available in three different heights: flat (4mm), medium (9mm) and high (14,5mm). Each of the three covers are compatible with forks with a 1 1/8" steerer tube...
€13.00
is41/is42 headset cover flat
Low stack headset cover (7mm) made of aluminium for our fully integrated is41- and is42-headset-upper-part. Compatible with forks with 1 1/8" steerer tube (28,6mm) at the top. Depending on the version, the cover has an outer diameter...
€12.00
zs56 headtube cover sh01, od62, asym, om, icr
headtube cover for acros zs56 headsets with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 62mm and a height of 8mm. Asymmetrical design and therefore only suitable for "standard" symmetrical stems...
€11.00
crown race 1.5" for zs56 blocklock
Crown race with steering stop 120° and 150°. Compatible with the acros headset zs56 in combination with a 1.5" steerer tube (40mm) at the bottom. ATTENTION: The 150° variant is not approved by every frame manufacturer. When using a...
€14.00
blocklock-zs66 headset lower part
Semi-integrated headset (zs) with steering stop for frames with 66mm head tube at the bottom. Our blocklock-zs66-headset-lower-part protects your top tube and down tube from contact with handlebars, attachments and the fork crown as well...
€75.00
zs56 headtube cover for fastback stem
headtube cover zs56 for the fastback stem with integrated cable routing (icr)
€16.00
is47 headset lower part
Integrated headset (is) for frames with 47mm bearing seat at the bottom of the head tube. In our is47-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure durability...
€42.00
is44 headset cover (ai-70) 4,5mm
Our low stack is44-headset-cover fits all canyon models with ai-70 canyon/i-lock headset . With this cover you can convert your ai-70-headsets to a classic headset cover and achieve a lower cockpit height. For the conversion you will...
€13.00