No results were found for the filter!
zs56 headtube-cover mondraker enduro, my25,...
zs56 headtube-cover mondraker enduro, my25, od62, icr
€11.00
is52 headtube-cover mondraker enduro, my25,...
is52 headtube-cover mondraker enduro, my25, od59, icr
€11.00
is47 headset lower part, 34/46.8
Integrated headset (is) for frames with 47mm bearing seat at the bottom of the head tube. In our is47-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure durability...
€35.00
topcover rose square, om, icr
topcover for rose square cockpits for retrofitting stems with normal 1 1/8” round spacers. Used in combination with spacers with article number 300.52.0036 and 300.52.0037. The height is 17mm.
€16.00
crown race 1 1/8" for zs44, is41 & is42, 4,5mm,...
Crown race with a stack hight of 4,5mm and an integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with the acros headsets zs44, is41 and is42 in combination with a 1 1/8" steerer tube...
€13.00
spacer set sh01, 2x10mm, 2x5mm
spacer set sh01 consists of 2x10mm and 2x5mm spacer. The spacers are compatible with our is52 headtube cover sh01 (24.52.216-OD56-AM) and zs56 headtube cover sh01(32.52.106R1-AM).
€21.00
is52 headtube cover sh01, od56, asym, om, icr
headtube cover sh01 for acros is52-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 56mm and a height of 5mm. Asymmetrical design and therefore only suitable for "standard"...
€11.00
is52 headset lower part, 1,5", 36°/45° for...
Fully integrated headset (is) for frames with 52mm bearing seat and the connecting angles 36°/45° at the bottom. This type of bearing is currently only used in Cannondale Lefty forks. In our is52 headset lower part, the combination of...
€42.00
plug headtube cover sh02, is52, zs56 and zs66
plug suitable for is52 headset cover sh02 24.52.217-OD56-AM zs56 headset cover sh02 32.52.212-OD62-AM is60 headset cover sh02 24.52.215-OD68-AM
€3.00
plug headtube cover sh01, is52 and zs556
plug for is52 headset cover sh01: 24.52.216-OD56-AM and zs56 headset cover sh01: 32.52.106R1-AM
€3.00
compressionring icr aluminium + IPS for...
Compression ring made from aluminium for integrated cable routing (icr) including a internal protection sealing (ips) for additional protection of the headset bearings against moisture and dirt. Compatible with the semi-integrated acros...
€19.00