No results were found for the filter!
is52/is52 bearing kit - integrated cable routing
Replacement headset bearings for frames with 52mm bearing seat of the head tube at the top and bottom and integrated cable guide (icr). Our is52/is52 bearing set consists of two angular contact ball bearings and a special centering ring...
€62.00
is52/is52 bearing kit a02,integrated cable routing
Replacement headset bearings for frames with 52mm bearing seat of the head tube at the top and bottom and integrated cable guide (icr). Our is52/is52 bearing set consists of two angular contact ball bearings and a special centering ring...
€62.00
zs56 headset upper part - integrated cable routing
Semi-integrated headset (zs) for frames with 56mm head tube at the top and integrated cable routing (icr). It can only be used in combination with matching headset cover ( zs 56 headset cover ) for integrated cable routing. The...
€44.00
ai-70 canyon/i-lock headset
Fully integrated headset for Canyon frames with 44mm bearing seat at the top and 48mm at the bottom of the head tube. The is44/is48-headset (ai-70) for Canyon is compatible with the models Inflite AL, Ultimate AL, Endurace, Urban AL,...
€103.00
headset grease - norust
headset grease for the assembly and maintenance of your acros headset.
Content
5 Gramm
(€50.00
* / 100 Gramm)
€2.50
zs44 headset upper part
Semi-integrated headset (zs) for frames with 44mm head tube at the top. In our zs44-headset-upper-part, the combination of stainless steel angular ball bearings and well thought-out sealings ensures durability with minimum maintenance...
€60.00
zs56 headset lower part
Semi-integrated headset (zs) for frames with 56mm head tube at the bottom. In our zs56-headset-lower-part, the combination of stainless steel angular ball bearings and well thought-out sealings ensures durability with minimum maintenance...
€44.00
zs56-headset cover - integrated cable routing
Headset cover for acros zs56-headset-upper-parts with integrated cable routing (icr). The icr-headset-cover has an outer diameter (od) of 62mm and a height of 9,5mm. The two rubber plugs are included. Each have three prepared cable...
€16.00
blocklock-zs56 headset lower part
Semi-integrated headset (zs) with steering stop for frames with 56mm headtube at the bottom. Our blocklock-zs56-headset-lower-part protects your top tube and down tube from contact with handlebars, attachments and the fork crown as well...
€70.00
compression ring 1 1/8" with seal
Compression ring with an integrated sealing for optimum protection of the headset bearing against moisture and dirt. Compatible with acros headset ec-34, zs44, zS49, zS56, is41 and is42 in combination with 1 1/8" steerer tubes (28.6mm)...
€7.00