No results were found for the filter!
zs56 headtube cover sh01, od62, asym, om, icr
headtube cover for acros zs56 headsets with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 62mm and a height of 8mm. Asymmetrical design and therefore only suitable for "standard" symmetrical stems...
€11.00
crown race 1.5" for zs56 blocklock
Crown race with steering stop 120° and 150°. Compatible with the acros headset zs56 in combination with a 1.5" steerer tube (40mm) at the bottom. ATTENTION: The 150° variant is not approved by every frame manufacturer. When using a...
Content
6.5 Gramm
(€215.38
* / 100 Gramm)
€14.00
blocklock-zs66 headset lower part
Semi-integrated headset (zs) with steering stop for frames with 66mm head tube at the bottom. Our blocklock-zs66-headset-lower-part protects your top tube and down tube from contact with handlebars, attachments and the fork crown as well...
€75.00
zs56 headtube cover for fastback stem
headtube cover zs56 for the fastback stem with integrated cable routing (icr)
€16.00
is47 headset lower part
Integrated headset (is) for frames with 47mm bearing seat at the bottom of the head tube. In our is47-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure durability...
€42.00
is44 headset cover (ai-70) 4,5mm
Our low stack is44-headset-cover fits all canyon models with ai-70 canyon/i-lock headset . With this cover you can convert your ai-70-headsets to a classic headset cover and achieve a lower cockpit height. For the conversion you will...
€13.00
is41 headset lower part
Fully integrated headset (is) for frames with 41mm bearing seat at the bottom of the head tube. In our is41-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure...
€44.00
crown race 1 1/8" for zs44, is41 & is42
Crown race with integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with the acros headsets zs44, is41 and is42 in combination with a 1 1/8" steerer tube (30mm) at the top.
€13.00
is41/is41-bearingset a02
Replacement headset bearingsset for frames with a 41mm - 36°/45° bearing seat at the top, 41mm - 45°/45° bottom of the head tube and forks with a 1 1/8" steerer tube. The is41/is41 bearing set consists of two stainless steel angular...
€62.00
ec49 headset lower part
External cup headset (ec) for frames with 49mm head tube at the bottom. In our ec49-headset-lower-part, the combination of stainless steel angular contact ball bearings and sophisticated sealings ensure durability with minimal...
€44.00
blocklock zs55 headset + internal cable routing
Semi-integrated headset (zs) with steering stop and internal cable routing for Simplon bikes with 55mm head tube at the top and bottom. Our blocklock-zs55-headset protects your top tube and down tube from contact with handlebars,...
€103.00