No results were found for the filter!
crown race 1.8" for zs66 & is60 headsets
Crown race with vulcanized-on seal for forks with 1.8" steerer tube. Suitable for zs66 headset and is60 headset.
€13.00
zs66 headset upper part, integrated cable routing
Semi-integrated headset (zs) for frames with 66mm head tube at the top and integrated cable routing (icr). It can only be used in combination with the matching headset cover. The headset-upper-part includes a zs66 bearing cup, a matching...
€44.00
mod45/56 - angle headset 0,4°
Do you want your Cube Stereo 170 2020-2021 to be even more downhill-oriented or to have more travel with almost the same bottom bracket height? With our acros angle headset you can change the steering angle of your bike in no time at...
€103.00
is52/is47-bearingset
Hedset bearings for Cube frames with 52mm bearing seat at the top and 47mm at the bottom of the head tube. The is52/is47 bearing set consists of two stainless steel angular contact ball bearings.
€62.00
zs49 headset lower part
Semi-integrated headset (zs) for frames with 49mm head tube at the bottom. In our zs49-headset-bottom-part, the combination of stainless steel angular contact ball bearings and sophisticated sealings ensures durability with minimum...
€44.00
is41/is42 headset cover high
High headset cover (15mm) made of aluminium for our fully integrated is41- and is42-headset-upper-parts. Compatible with forks with a 1 1/8" steerer tube (28.6mm) at the top. The cover has an outer diameter (od) of 46mm or 48mm.
€12.00
is42 headset lower part
Fully integrated headset (is) for frames with 42mm bearing seat at the bottom of the head tube. In our is42-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure...
€42.00
mod45/56 - angle headset 1°
You want your Radon Swoop 2020/2021 to be even more downhill-oriented or to have more travel with almost the same bottom bracket height? With our acros angle headset you can change the steering angle of your bike in no time at all. This...
€103.00
crown race zs66 blocklock
Crown race for forks with 1.5" or 1.8" steerer tube. Allows the change from the original fork with 1.8" steerer to a fork with 1.1/8" steerer or vice versa. Suitable for zs66 blocklock acros headsets.
€16.00
crown race 1.1/8" for zs66 & is60
Crown race for forks with 1.1/8" steerer tube. Allows the change from the original fork with 1.8" steerer to a fork with 1.1/8" steerer. Suitable for zs66 and is60 acros headsets.
€13.00
is52/is52 bearing set a01
Replacement headset bearings for frames with 52mm bearing seat of the head tube at the top and bottom and integrated cable guide (icr). Our is52/is52 bearing set consists of two angular contact ball bearings and a special centering ring...
€62.00