No results were found for the filter!
is41/is41-bearingset a02
Replacement headset bearingsset for frames with a 41mm - 36°/45° bearing seat at the top, 41mm - 45°/45° bottom of the head tube and forks with a 1 1/8" steerer tube. The is41/is41 bearing set consists of two stainless steel angular...
€62.00
spacer sh02 with light mount
Spacer for sh02 headset covers with light mount (M6) in 10mm height. spacers are suitable for is52 headset cover sh02 24.52.217-OD56-AM zs56 headset cover sh02 32.52.212-OD62-AM is60 headset cover sh02 24.52.215-OD68-AM Maximum total...
€14.00
zs56 headtube-cover mondraker enduro, my25,...
zs56 headtube-cover mondraker enduro, my25, od62, icr
€11.00
is52 headtube-cover mondraker enduro, my25,...
is52 headtube-cover mondraker enduro, my25, od59, icr
€11.00
is47 headset lower part, 34/46.8
Integrated headset (is) for frames with 47mm bearing seat at the bottom of the head tube. In our is47-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure durability...
€35.00
topcover rose square, om, icr
topcover for rose square cockpits for retrofitting stems with normal 1 1/8” round spacers. Used in combination with spacers with article number 300.52.0036 and 300.52.0037. The height is 17mm.
€16.00
spacer set sh01, 2x10mm, 2x5mm
spacer set sh01 consists of 2x10mm and 2x5mm spacer. The spacers are compatible with our is52 headtube cover sh01 (24.52.216-OD56-AM) and zs56 headtube cover sh01(32.52.106R1-AM).
€21.00
is52 headtube cover sh01, od56, asym, om, icr
headtube cover sh01 for acros is52-headset-upper-parts with integrated cable routing (icr). The icr headtube cover has an outer diameter (od) of 56mm and a height of 5mm. Asymmetrical design and therefore only suitable for "standard"...
€11.00