No results were found for the filter!
bottom bracket grease - norust
bottom bracket tool for the assembly and maintenance of your acros bottom bracket.
Content
5 Gramm
(€50.00
* / 100 Gramm)
€2.50
is48/is48-bearingset, canyon
Headset bearing set for Canyon frames with 48mm bearing seat at the top and 48mm at the bottom of the head tube. The is48/is48 bearing set consists of one steel angular contact ball bearing with the dimensions 37x48x5mm and 39x48x7mm...
€62.00
crown race 1.5" for zs56 blocklock
Crown race with steering stop 120° and 150°. Compatible with the acros headset zs56 in combination with a 1.5" steerer tube (40mm) at the bottom. ATTENTION: The 150° variant is not approved by every frame manufacturer. When using a...
Content
6.5 Gramm
(€215.38
* / 100 Gramm)
€14.00
is60 headset upper part, integrated cable routing
Integrated headset (is) for frames with 60mm head tube at the top and integrated cable routing (icr). It can only be used in combination with the matching headset cover. The headset-upper-part includes a matching angular contact ball...
€41.95
is52/is60-lagerset, integrated cable routing
Replacement headset bearings for frames with 52mm bearing seat of the head tube at the top and 60mm at the bottom and integrated cable guide (icr). Our is52/is60 bearing set consists of two angular contact ball bearings and a special...
€62.00
is60 headset lower part
Integrated headset (is) for frames with 60mm head tube at the bottom. In our is60-headset-bottom-part, the combination of angular contact ball bearings and well thought-out sealings ensure durability with minimum maintenance and...
€44.00
compression ring 1 1/8" with seal
Compression ring with an integrated sealing for optimum protection of the headset bearing against moisture and dirt. Compatible with acros headset ec-34, zs44, zS49, zS56, is41 and is42 in combination with 1 1/8" steerer tubes (28.6mm)...
€7.00
is44 headset cover (ai-70) 4,5mm
Our low stack is44-headset-cover fits all canyon models with ai-70 canyon/i-lock headset . With this cover you can convert your ai-70-headsets to a classic headset cover and achieve a lower cockpit height. For the conversion you will...
€13.00
is44/is52-bearingset a02
is44/is52 bearing set including centering ring. The two bearings in the dimensions 44x35x5,5-36°/45° und 52x40x7-45°/45° are used, among others, by the bicycle manufacturer Scott
€62.00
crown race 1 1/8" for ec49, zs55, zs56 and is52
Crown race with integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with acros headsets ec49, zS55, zS56 and is52 in combination with 1 1/8" steerer tubes (30mm) at the top.
€13.00