No results were found for the filter!
compression ring (ai-70) for canyon
The matching centering ring for acros is44-headset-upper-parts (ai70) in combination with a 1 1/4" steerer tube (31,6mm) at the top.
€4.00
is41/is41-bearingset a01
Replacement headset bearingsset for frames with a 41mm bearing seat at the top and bottom of the head tube and forks with a 1 1/8" steerer tube. The is41/is41 bearing set consists of two stainless steel angular contact ball bearings and...
€62.00
carbon assemblypaste, 120g
anti-slip assembly paste for the assembly of acrosblocklock headsets, handlebars, stems and seat posts
Content
5 Gramm
(€220.00
* / 100 Gramm)
€11.00
carbon assemblypaste - noslip
anti-slip assembly paste for the assembly of acrosblocklock headsets, handlebars, stems and seat posts
Content
5 Gramm
(€50.00
* / 100 Gramm)
€2.50
bottom bracket grease - norust
bottom bracket tool for the assembly and maintenance of your acros bottom bracket.
Content
5 Gramm
(€50.00
* / 100 Gramm)
€2.50
crown race 1.5" for zs56 blocklock
Crown race with steering stop 120° and 150°. Compatible with the acros headset zs56 in combination with a 1.5" steerer tube (40mm) at the bottom. ATTENTION: The 150° variant is not approved by every frame manufacturer. When using a...
Content
6.5 Gramm
(€215.38
* / 100 Gramm)
€14.00
is60 headset upper part, integrated cable routing
Integrated headset (is) for frames with 60mm head tube at the top and integrated cable routing (icr). It can only be used in combination with the matching headset cover. The headset-upper-part includes a matching angular contact ball...
€41.95
is52/is60-lagerset, integrated cable routing
Replacement headset bearings for frames with 52mm bearing seat of the head tube at the top and 60mm at the bottom and integrated cable guide (icr). Our is52/is60 bearing set consists of two angular contact ball bearings and a special...
€62.00
is60 headset lower part
Integrated headset (is) for frames with 60mm head tube at the bottom. In our is60-headset-bottom-part, the combination of angular contact ball bearings and well thought-out sealings ensure durability with minimum maintenance and...
€44.00
compression ring 1 1/8" with seal
Centering ring with an integrated sealing for optimum protection of the headset bearing against moisture and dirt. Compatible with acros headset ec-34, zs44, zS49, zS56, is41 and is42 in combination with 1 1/8" steerer tubes (28.6mm) at...
€7.00
is44 headset cover (ai-70) 4,5mm
Our low stack is44-headset-cover fits all canyon models with ai-70 canyon/i-lock headset . With this cover you can convert your ai-70-headsets to a classic headset cover and achieve a lower cockpit height. For the conversion you will...
€13.00