No results were found for the filter!
spacer-set, aluminium, od34
spacer set for a 1 1/8" steerer tube with an outer diameter (od) of 34mm, 2x 5mm spacer & 2x 10mm spacer
€6.00
is41 headset upper part
Fully integrated headset (is) for frames with 41mm bearing seat at top of the head tube. In our is41-headset-upper part a combination of stainless steel angular contact ball bearings and well thought-out sealings ensure durability with...
€60.00
zs44 headset lower part
Semi-integrated headset (zs) for frames with 44mm head tube at the bottom. In our zs44-headset-lower-part, the combination of stainless steel angular ball bearings and well thought-out sealings ensures durability with minimum maintenance...
€44.00
zs66 headset lower part
Semi-integrated headset (zs) for frames with 66mm head tube at the bottom. In our zs66-headset-bottom-part, the combination of angular contact ball bearings and well thought-out sealings ensure durability with minimum maintenance and...
€44.00
top cover + spacer set, icr, od62, cube
top cover + spacer set, icr, od62 for Cube Performance e-mtb stem.
€21.00
crown race 1 1/8" for ec44, ec49, zs55, zs56...
Crown race with integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with acros headsets ec44, ec49, zS55, zS56 and is52 in combination with 1 1/8" steerer tubes (30mm) at the top.
€13.00
zs55 headset lower part
Semi-integrated headset (zs) for frames with 55mm head tube at the bottom. In our zs55-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure longevity with minimum...
€44.00
is44/is52-bearingset a01
is44/is52 bearing set including centering ring. The two bearings in the dimensions 44x35x5,5-36°/36° und 52x40x7-45°/45° are used, among others, by the bicycle manufacturer Canyon in the Grizle model.
€62.00
set plugs for headset cover icr
Set of plugs for icr headset cover, consisting of a left and right plug. The two rubber plugs have three prepared cable bushings which can be used as required. In total, up to 6 cables can be routed watertight into the frame. Compatible...
€3.00
zs44 headset cover
Aluminium headset cover for our semi-integrated zs44-headset-upper-part. Available in three different heights: flat (4mm), medium (9mm) and high (14,5mm). Each of the three covers are compatible with forks with a 1 1/8" steerer tube...
€13.00
is41/is42 headset cover flat
Low stack headset cover (7mm) made of aluminium for our fully integrated is41- and is42-headset-upper-part. Compatible with forks with 1 1/8" steerer tube (28,6mm) at the top. Depending on the version, the cover has an outer diameter...
€12.00