No results were found for the filter!
crown race 1.5" for zs56 blocklock
Crown race with steering stop 120° and 150°. Compatible with the acros headset zs56 in combination with a 1.5" steerer tube (40mm) at the bottom. ATTENTION: The 150° variant is not approved by every frame manufacturer. When using a...
Content
6.5 Gramm
(€215.38
* / 100 Gramm)
€14.00
blocklock-zs66 headset lower part
Semi-integrated headset (zs) with steering stop for frames with 66mm head tube at the bottom. Our blocklock-zs66-headset-lower-part protects your top tube and down tube from contact with handlebars, attachments and the fork crown as well...
€75.00
zs56 headtube cover for fastback stem
headtube cover zs56 for the fastback stem with integrated cable routing (icr)
€16.00
is47 headset lower part
Integrated headset (is) for frames with 47mm bearing seat at the bottom of the head tube. In our is47-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure durability...
€42.00
is44 headset cover (ai-70) 4,5mm
Our low stack is44-headset-cover fits all canyon models with ai-70 canyon/i-lock headset . With this cover you can convert your ai-70-headsets to a classic headset cover and achieve a lower cockpit height. For the conversion you will...
€13.00
is41 headset lower part
Fully integrated headset (is) for frames with 41mm bearing seat at the bottom of the head tube. In our is41-headset-bottom-part the combination of stainless steel angular contact ball bearings and well thought-out sealings ensure...
€44.00
crown race 1 1/8" for zs44, is41 & is42
Crown race with a stack hight of 2.1mm and integrated sealing for optimal protection of the headset bearings against moisture and dirt. Compatible with the acros headsets zs44, is41 and is42 in combination with a 1 1/8" steerer tube...
€13.00
is41/is41-bearingset a02
Replacement headset bearingsset for frames with a 41mm - 36°/45° bearing seat at the top, 41mm - 45°/45° bottom of the head tube and forks with a 1 1/8" steerer tube. The is41/is41 bearing set consists of two stainless steel angular...
€62.00
ec49 headset lower part
External cup headset (ec) for frames with 49mm head tube at the bottom. In our ec49-headset-lower-part, the combination of stainless steel angular contact ball bearings and sophisticated sealings ensure durability with minimal...
€44.00
blocklock zs55 headset + internal cable routing
Semi-integrated headset (zs) with steering stop and internal cable routing for Simplon bikes with 55mm head tube at the top and bottom. Our blocklock-zs55-headset protects your top tube and down tube from contact with handlebars,...
€103.00
crown race 1.8" for zs66 & is60 headsets
Crown race with vulcanized-on seal for forks with 1.8" steerer tube. Suitable for zs66 headset and is60 headset.
€13.00