mod45/56 - angle headset 0,4° | headsets | core | products

Preview: mod45/56 - winkelsteuersatz 0,4°

€103.00

Prices incl. VAT plus shipping costs

Ready for immediate shipment, delivery time 1-3 working days within Germany

Artikel-Nr.: 300.52.1008AM

Order number: 300.52.1008AM

kurzbeschreibung

Do you want your Cube Stereo 170 2020-2021 to be even more downhill-oriented or to have more travel with almost the same bottom bracket height? With our acros angle headset you can change the steering angle of your bike in no time at all. This results in a maximum steering angle adjustment of up to 0.8° and can currently only be fitted to frames that have been prepared for this purpose by the manufacturer.

produktdetails anzeigen

highlights
produktbeschreibung
technische daten
faq

Share your experiences with us!

#ridemoreworryless

Tomas

A quick turn of the bearing shells and the steep 64.8° became a flat 64° head angle!

Christian

Great idea! So far also without creaking and that is not obvious especially with angle headsets.

This angle headset will only fit your bike if the manufacturer has already specified this at the factory. In addition, the upper head tube diameter must be 44.9mm and the lower head tube diameter 55.9mm.

To ensure that the steering angles are the same for frames of different sizes, different headset versions are required. You can easily find out which version is right for your bike by determining the head tube length of your frame. You can then easily select the right version via the drop-down menu. You can choose between the lengths 103mm, 113mm and 133mm.

installation instructions
schematic diagram upper part
schematic diagram lower part

inner diameter of head tube (ID)	44.9mm
headset outer diameter (OD)	51.2mm
Ø upper steerer tube (SD)	28.6mm/1 1/8"
upper bearing dimensions	41x30,10x6,5 - 36°/45°
stack height (H)	6.2mm

inner diameter of head tube (ID)	55.9mm
headset outer diameter (OD)	62.2mm
Ø lower steerer tube (SD)	39.78mm/1.5"
lower bearing dimensions	40x52x7 - 45°/45°
stack height (H)	2.3mm

our angle adjustment headset 0,4° 41/52

A headset is one of those essential components of a bike that you don’t even recognize at first. It’s also much more complex than you would think at first glance.

Our angle adjustment headset is the result of a long period of testing, head scratching and tweaking with the goal to make it the best solution on the market. Today it’s used by several bike brands such as Cube and Radon. We use our very own stainless steel angular contact headset bearings. Moisture and dirt is kept outside of your bearings with two double lip sealings and our optimized headset grease. That way we offer you a product that’s supposed to last, no matter what your adventure throws at you.You can of course expect the same durability from your angle adjustment headset that you are used from our other headsets.

In addition our angle adjustment headset comes with additional well thought-out seals to further prevent water and dirt from even making its way to the heart of your headset: the bearing. This guarantees durability with minimal maintenance effort - so that you can maximize your good times in the saddle.

Please note though that it can’t be used on every frame, as frames have to be prepared during production to work “hand in hand” with our angle adjustment headset.

double-sealed angular contact bearings
bearings made of stainless steel
fork crown race with cured-on sealing
compression ring made of fiberglass-reinforced plastic with cured-on seal
easy head angle adjustment
easy and convenient bearing change

features

easy adjustment of the steering angle

Depending on the installation position of the bearing shells, the steering angle can be adjusted. However, the angle headset can only be installed on frames that have been prepared for our headset by the manufacturer.

in detail

technical specifications

faq

frequently asked questions

High quality angular contact ball bearings

We use special angular contact ball bearings in our aftermarket headsets. They can cope particularly well with the radial and axial forces occurring at the head tube and thus contribute to the long durability of the headset.

water-resistant bearing grease

We use water-resistant bearing grease that has been specially optimised for use in headset bearings. It is particularly tough and stays where it belongs: inside the bearing. It protects your headset particularly well and for a long time from wear.

sophisticated sealing technology

A whole series of seals effectively keeps moisture and dirt away from the heart of our headsets, the angular contact ball bearings. For you, this means: less maintenance and longer durability!

sealing on base plate and compression ring

We vulcanise a self-reinforcing seal onto the base plate and compression ring. An extra robust material prevents the seal from becoming brittle over time. The bearing is thus optimally protected and only minimal friction is generated.

double lip seal

The industrial ball bearings in our headsets are equipped with a double lip seal. This prevents water or dirt from entering the headset bearing and washing out the bearing grease. This ensures a long service life.

How can I tell if I have a flat or steep steering angle? The angle headset without ICR uses different bearing shells -in size- for the upper and lower part. The markings on the bearing shells must always point in the same direction when mounted.

For a flat steering angle, both markings must point forward, i.e. in the direction of travel. If, on the other hand, you want to use the steep steering angle option, both markings must point to the rear, i.e. against the direction of travel.

For more info check out the installation instructions.

Upper and lower angle headset shells
Upper and lower bearing
Headset cover
base plate 1.5"
compression ring 1 1/8"

If you use your bike the way the designers intended, your headset will eventually wear out. The only way to prevent this is to only ride your bike on the cycle path to the ice cream parlour when it is dry. Unfortunately, bearings are and always will be wearing parts. But the good news is: if you don't use a high-pressure cleaner on the headset at full throttle and use bike cleaners such as Muc-Off sparingly in the area of the bearings, you should have fun with your headset for a long time.

"Install and forget" is our motto. Nothing is more annoying than bike parts that let you down and need a lot of care, because your time is precious and should be spent on the bike if possible. That's why we use a whole range of seals that, together with our special headset grease, play a decisive role in ensuring that you enjoy your headset for a long time.

Headsets are a complex component. Because of the many different standards and sizes, it is not always easy to understand what you need. If you have any further questions, please do not hesitate to contact us. You can find out the best way to contact us here .